Hive connector#

The Hive connector allows querying data stored in an Apache Hive data warehouse. Hive is a combination of three components:

  • Data files in varying formats, that are typically stored in the Hadoop Distributed File System (HDFS) or in object storage systems such as Amazon S3.

  • Metadata about how the data files are mapped to schemas and tables. This metadata is stored in a database, such as MySQL, and is accessed via the Hive metastore service.

  • A query language called HiveQL. This query language is executed on a distributed computing framework such as MapReduce or Tez.

Trino only uses the first two components: the data and the metadata. It does not use HiveQL or any part of Hive’s execution environment.

Requirements#

The Hive connector requires a Hive metastore service (HMS), or a compatible implementation of the Hive metastore, such as AWS Glue.

Apache Hadoop HDFS 2.x and 3.x are supported.

Many distributed storage systems including HDFS, Amazon S3 or S3-compatible systems, Google Cloud Storage, Azure Storage, and IBM Cloud Object Storage can be queried with the Hive connector.

The coordinator and all workers must have network access to the Hive metastore and the storage system. Hive metastore access with the Thrift protocol defaults to using port 9083.

Data files must be in a supported file format. Some file formats can be configured using file format configuration properties per catalog:

  • ORC

  • Parquet

  • Avro

  • RCText (RCFile using ColumnarSerDe)

  • RCBinary (RCFile using LazyBinaryColumnarSerDe)

  • SequenceFile

  • JSON (using org.apache.hive.hcatalog.data.JsonSerDe)

  • CSV (using org.apache.hadoop.hive.serde2.OpenCSVSerde)

  • TextFile

General configuration#

To configure the Hive connector, create a catalog properties file etc/catalog/example.properties that references the hive connector and defines a metastore. You must configure a metastore for table metadata. If you are using a Hive metastore, hive.metastore.uri must be configured:

connector.name=hive
hive.metastore.uri=thrift://example.net:9083

If you are using AWS Glue as your metastore, you must instead set hive.metastore to glue:

connector.name=hive
hive.metastore=glue

Each metastore type has specific configuration properties along with general metastore configuration properties.

Multiple Hive clusters#

You can have as many catalogs as you need, so if you have additional Hive clusters, simply add another properties file to etc/catalog with a different name, making sure it ends in .properties. For example, if you name the property file sales.properties, Trino creates a catalog named sales using the configured connector.

HDFS configuration#

For basic setups, Trino configures the HDFS client automatically and does not require any configuration files. In some cases, such as when using federated HDFS or NameNode high availability, it is necessary to specify additional HDFS client options in order to access your HDFS cluster. To do so, add the hive.config.resources property to reference your HDFS config files:

hive.config.resources=/etc/hadoop/conf/core-site.xml,/etc/hadoop/conf/hdfs-site.xml

Only specify additional configuration files if necessary for your setup. We recommend reducing the configuration files to have the minimum set of required properties, as additional properties may cause problems.

The configuration files must exist on all Trino nodes. If you are referencing existing Hadoop config files, make sure to copy them to any Trino nodes that are not running Hadoop.

HDFS username and permissions#

Before running any CREATE TABLE or CREATE TABLE AS statements for Hive tables in Trino, you must check that the user Trino is using to access HDFS has access to the Hive warehouse directory. The Hive warehouse directory is specified by the configuration variable hive.metastore.warehouse.dir in hive-site.xml, and the default value is /user/hive/warehouse.

When not using Kerberos with HDFS, Trino accesses HDFS using the OS user of the Trino process. For example, if Trino is running as nobody, it accesses HDFS as nobody. You can override this username by setting the HADOOP_USER_NAME system property in the Trino JVM config, replacing hdfs_user with the appropriate username:

-DHADOOP_USER_NAME=hdfs_user

The hive user generally works, since Hive is often started with the hive user and this user has access to the Hive warehouse.

Whenever you change the user Trino is using to access HDFS, remove /tmp/presto-* on HDFS, as the new user may not have access to the existing temporary directories.

Hive general configuration properties#

The following table lists general configuration properties for the Hive connector. There are additional sets of configuration properties throughout the Hive connector documentation.

Hive general configuration properties#

Property Name

Description

Default

hive.config.resources

An optional comma-separated list of HDFS configuration files. These files must exist on the machines running Trino. Only specify this if absolutely necessary to access HDFS. Example: /etc/hdfs-site.xml

hive.recursive-directories

Enable reading data from subdirectories of table or partition locations. If disabled, subdirectories are ignored. This is equivalent to the hive.mapred.supports.subdirectories property in Hive.

false

hive.ignore-absent-partitions

Ignore partitions when the file system location does not exist rather than failing the query. This skips data that may be expected to be part of the table.

false

hive.storage-format

The default file format used when creating new tables.

ORC

hive.compression-codec

The compression codec to use when writing files. Possible values are NONE, SNAPPY, LZ4, ZSTD, or GZIP.

GZIP

hive.force-local-scheduling

Force splits to be scheduled on the same node as the Hadoop DataNode process serving the split data. This is useful for installations where Trino is collocated with every DataNode.

false

hive.respect-table-format

Should new partitions be written using the existing table format or the default Trino format?

true

hive.immutable-partitions

Can new data be inserted into existing partitions? If true then setting hive.insert-existing-partitions-behavior to APPEND is not allowed. This also affects the insert_existing_partitions_behavior session property in the same way.

false

hive.insert-existing-partitions-behavior

What happens when data is inserted into an existing partition? Possible values are

  • APPEND - appends data to existing partitions

  • OVERWRITE - overwrites existing partitions

  • ERROR - modifying existing partitions is not allowed

APPEND

hive.target-max-file-size

Best effort maximum size of new files.

1GB

hive.create-empty-bucket-files

Should empty files be created for buckets that have no data?

false

hive.validate-bucketing

Enables validation that data is in the correct bucket when reading bucketed tables.

true

hive.partition-statistics-sample-size

Specifies the number of partitions to analyze when computing table statistics.

100

hive.max-partitions-per-writers

Maximum number of partitions per writer.

100

hive.max-partitions-for-eager-load

The maximum number of partitions for a single table scan to load eagerly on the coordinator. Certain optimizations are not possible without eager loading.

100,000

hive.max-partitions-per-scan

Maximum number of partitions for a single table scan.

1,000,000

hive.dfs.replication

Hadoop file system replication factor.

hive.security

See Hive connector security configuration.

security.config-file

Path of config file to use when hive.security=file. See Catalog-level access control files for details.

hive.non-managed-table-writes-enabled

Enable writes to non-managed (external) Hive tables.

false

hive.non-managed-table-creates-enabled

Enable creating non-managed (external) Hive tables.

true

hive.collect-column-statistics-on-write

Enables automatic column level statistics collection on write. See Table statistics for details.

true

hive.file-status-cache-tables

Cache directory listing for specific tables. Examples:

  • fruit.apple,fruit.orange to cache listings only for tables apple and orange in schema fruit

  • fruit.*,vegetable.* to cache listings for all tables in schemas fruit and vegetable

  • * to cache listings for all tables in all schemas

hive.file-status-cache.max-retained-size

Maximum retained size of cached file status entries.

1GB

hive.file-status-cache-expire-time

How long a cached directory listing is considered valid.

1m

hive.per-transaction-file-status-cache.max-retained-size

Maximum retained size of all entries in per transaction file status cache. Retained size limit is shared across all running queries.

100MB

hive.rcfile.time-zone

Adjusts binary encoded timestamp values to a specific time zone. For Hive 3.1+, this must be set to UTC.

JVM default

hive.timestamp-precision

Specifies the precision to use for Hive columns of type TIMESTAMP. Possible values are MILLISECONDS, MICROSECONDS and NANOSECONDS. Values with higher precision than configured are rounded.

MILLISECONDS

hive.temporary-staging-directory-enabled

Controls whether the temporary staging directory configured at hive.temporary-staging-directory-path is used for write operations. Temporary staging directory is never used for writes to non-sorted tables on S3, encrypted HDFS or external location. Writes to sorted tables will utilize this path for staging temporary files during sorting operation. When disabled, the target storage will be used for staging while writing sorted tables which can be inefficient when writing to object stores like S3.

true

hive.temporary-staging-directory-path

Controls the location of temporary staging directory that is used for write operations. The ${USER} placeholder can be used to use a different location for each user.

/tmp/presto-${USER}

hive.hive-views.enabled

Enable translation for Hive views.

false

hive.hive-views.legacy-translation

Use the legacy algorithm to translate Hive views. You can use the hive_views_legacy_translation catalog session property for temporary, catalog specific use.

false

hive.parallel-partitioned-bucketed-writes

Improve parallelism of partitioned and bucketed table writes. When disabled, the number of writing threads is limited to number of buckets.

true

hive.fs.new-directory-permissions

Controls the permissions set on new directories created for tables. It must be either ‘skip’ or an octal number, with a leading 0. If set to skip, permissions of newly created directories will not be set by Trino.

0777

hive.fs.cache.max-size

Maximum number of cached file system objects.

1000

hive.query-partition-filter-required

Set to true to force a query to use a partition filter. You can use the query_partition_filter_required catalog session property for temporary, catalog specific use.

false

hive.table-statistics-enabled

Enables Table statistics. The equivalent catalog session property is statistics_enabled for session specific use. Set to false to disable statistics. Disabling statistics means that Cost-based optimizations can not make smart decisions about the query plan.

true

hive.auto-purge

Set the default value for the auto_purge table property for managed tables. See the Table properties for more information on auto_purge.

false

hive.partition-projection-enabled

Enables Athena partition projection support

false

hive.max-partition-drops-per-query

Maximum number of partitions to drop in a single query.

100,000

hive.single-statement-writes

Enables auto-commit for all writes. This can be used to disallow multi-statement write transactions.

false

Storage#

The Hive connector supports the following storage options:

The Hive connector also supports storage caching.

Security#

Please see the Hive connector security configuration section for information on the security options available for the Hive connector.

SQL support#

The connector provides read access and write access to data and metadata in the configured object storage system and metadata stores:

Refer to the migration guide for practical advice on migrating from Hive to Trino.

The following sections provide Hive-specific information regarding SQL support.

Basic usage examples#

The examples shown here work on Google Cloud Storage by replacing s3:// with gs://.

Create a new Hive table named page_views in the web schema that is stored using the ORC file format, partitioned by date and country, and bucketed by user into 50 buckets. Note that Hive requires the partition columns to be the last columns in the table:

CREATE TABLE example.web.page_views (
  view_time TIMESTAMP,
  user_id BIGINT,
  page_url VARCHAR,
  ds DATE,
  country VARCHAR
)
WITH (
  format = 'ORC',
  partitioned_by = ARRAY['ds', 'country'],
  bucketed_by = ARRAY['user_id'],
  bucket_count = 50
)

Create a new Hive schema named web that stores tables in an S3 bucket named my-bucket:

CREATE SCHEMA example.web
WITH (location = 's3://my-bucket/')

Drop a schema:

DROP SCHEMA example.web

Drop a partition from the page_views table:

DELETE FROM example.web.page_views
WHERE ds = DATE '2016-08-09'
  AND country = 'US'

Query the page_views table:

SELECT * FROM example.web.page_views

List the partitions of the page_views table:

SELECT * FROM example.web."page_views$partitions"

Create an external Hive table named request_logs that points at existing data in S3:

CREATE TABLE example.web.request_logs (
  request_time TIMESTAMP,
  url VARCHAR,
  ip VARCHAR,
  user_agent VARCHAR
)
WITH (
  format = 'TEXTFILE',
  external_location = 's3://my-bucket/data/logs/'
)

Collect statistics for the request_logs table:

ANALYZE example.web.request_logs;

Drop the external table request_logs. This only drops the metadata for the table. The referenced data directory is not deleted:

DROP TABLE example.web.request_logs
  • CREATE TABLE AS can be used to create transactional tables in ORC format like this:

    CREATE TABLE <name>
    WITH (
        format='ORC',
        transactional=true
    )
    AS <query>
    

Add an empty partition to the page_views table:

CALL system.create_empty_partition(
    schema_name => 'web',
    table_name => 'page_views',
    partition_columns => ARRAY['ds', 'country'],
    partition_values => ARRAY['2016-08-09', 'US']);

Drop stats for a partition of the page_views table:

CALL system.drop_stats(
    schema_name => 'web',
    table_name => 'page_views',
    partition_values => ARRAY[ARRAY['2016-08-09', 'US']]);

Procedures#

Use the CALL statement to perform data manipulation or administrative tasks. Procedures must include a qualified catalog name, if your Hive catalog is called web:

CALL web.system.example_procedure()

The following procedures are available:

  • system.create_empty_partition(schema_name, table_name, partition_columns, partition_values)

    Create an empty partition in the specified table.

  • system.sync_partition_metadata(schema_name, table_name, mode, case_sensitive)

    Check and update partitions list in metastore. There are three modes available:

    • ADD : add any partitions that exist on the file system, but not in the metastore.

    • DROP: drop any partitions that exist in the metastore, but not on the file system.

    • FULL: perform both ADD and DROP.

    The case_sensitive argument is optional. The default value is true for compatibility with Hive’s MSCK REPAIR TABLE behavior, which expects the partition column names in file system paths to use lowercase (e.g. col_x=SomeValue). Partitions on the file system not conforming to this convention are ignored, unless the argument is set to false.

  • system.drop_stats(schema_name, table_name, partition_values)

    Drops statistics for a subset of partitions or the entire table. The partitions are specified as an array whose elements are arrays of partition values (similar to the partition_values argument in create_empty_partition). If partition_values argument is omitted, stats are dropped for the entire table.

  • system.register_partition(schema_name, table_name, partition_columns, partition_values, location)

    Registers existing location as a new partition in the metastore for the specified table.

    When the location argument is omitted, the partition location is constructed using partition_columns and partition_values.

    Due to security reasons, the procedure is enabled only when hive.allow-register-partition-procedure is set to true.

  • system.unregister_partition(schema_name, table_name, partition_columns, partition_values)

    Unregisters given, existing partition in the metastore for the specified table. The partition data is not deleted.

  • system.flush_metadata_cache()

    Flush all Hive metadata caches.

  • system.flush_metadata_cache(schema_name => ..., table_name => ...)

    Flush Hive metadata caches entries connected with selected table. Procedure requires named parameters to be passed

  • system.flush_metadata_cache(schema_name => ..., table_name => ..., partition_columns => ARRAY[...], partition_values => ARRAY[...])

    Flush Hive metadata cache entries connected with selected partition. Procedure requires named parameters to be passed.

Data management#

Some data management statements may be affected by the Hive catalog’s authorization check policy. In the default legacy policy, some statements are disabled by default. See Hive connector security configuration for more information.

The Data management functionality includes support for INSERT, UPDATE, DELETE, and MERGE statements, with the exact support depending on the storage system, file format, and metastore.

When connecting to a Hive metastore version 3.x, the Hive connector supports reading from and writing to insert-only and ACID tables, with full support for partitioning and bucketing.

DELETE applied to non-transactional tables is only supported if the table is partitioned and the WHERE clause matches entire partitions. Transactional Hive tables with ORC format support “row-by-row” deletion, in which the WHERE clause may match arbitrary sets of rows.

UPDATE is only supported for transactional Hive tables with format ORC. UPDATE of partition or bucket columns is not supported.

MERGE is only supported for ACID tables.

ACID tables created with Hive Streaming Ingest are not supported.

Schema and table management#

The Hive connector supports querying and manipulating Hive tables and schemas (databases). While some uncommon operations must be performed using Hive directly, most operations can be performed using Trino.

Schema evolution#

Hive table partitions can differ from the current table schema. This occurs when the data types of columns of a table are changed from the data types of columns of preexisting partitions. The Hive connector supports this schema evolution by allowing the same conversions as Hive. The following table lists possible data type conversions.

Hive schema evolution type conversion#

Data type

Converted to

BOOLEAN

VARCHAR

VARCHAR

TINYINT, SMALLINT, INTEGER, BIGINT, DOUBLE, TIMESTAMP, DATE, as well as narrowing conversions for VARCHAR

CHAR

narrowing conversions for CHAR

TINYINT

VARCHAR, SMALLINT, INTEGER, BIGINT, DOUBLE, DECIMAL

SMALLINT

VARCHAR, INTEGER, BIGINT, DOUBLE, DECIMAL

INTEGER

VARCHAR, BIGINT, DOUBLE, DECIMAL

BIGINT

VARCHAR, DOUBLE, DECIMAL

REAL

DOUBLE, DECIMAL

DOUBLE

FLOAT, DECIMAL

DECIMAL

DOUBLE, REAL, VARCHAR, TINYINT, SMALLINT, INTEGER, BIGINT, as well as narrowing and widening conversions for DECIMAL

DATE

VARCHAR

TIMESTAMP

VARCHAR, DATE

Any conversion failure results in null, which is the same behavior as Hive. For example, converting the string 'foo' to a number, or converting the string '1234' to a TINYINT (which has a maximum value of 127).

Avro schema evolution#

Trino supports querying and manipulating Hive tables with the Avro storage format, which has the schema set based on an Avro schema file/literal. Trino is also capable of creating the tables in Trino by infering the schema from a valid Avro schema file located locally, or remotely in HDFS/Web server.

To specify that the Avro schema should be used for interpreting table data, use the avro_schema_url table property.

The schema can be placed in the local file system or remotely in the following locations:

  • HDFS (e.g. avro_schema_url = 'hdfs://user/avro/schema/avro_data.avsc')

  • S3 (e.g. avro_schema_url = 's3n:///schema_bucket/schema/avro_data.avsc')

  • A web server (e.g. avro_schema_url = 'http://example.org/schema/avro_data.avsc')

The URL, where the schema is located, must be accessible from the Hive metastore and Trino coordinator/worker nodes.

Alternatively, you can use the table property avro_schema_literal to define the Avro schema.

The table created in Trino using the avro_schema_url or avro_schema_literal property behaves the same way as a Hive table with avro.schema.url or avro.schema.literal set.

Example:

CREATE TABLE example.avro.avro_data (
   id BIGINT
 )
WITH (
   format = 'AVRO',
   avro_schema_url = '/usr/local/avro_data.avsc'
)

The columns listed in the DDL (id in the above example) is ignored if avro_schema_url is specified. The table schema matches the schema in the Avro schema file. Before any read operation, the Avro schema is accessed so the query result reflects any changes in schema. Thus Trino takes advantage of Avro’s backward compatibility abilities.

If the schema of the table changes in the Avro schema file, the new schema can still be used to read old data. Newly added/renamed fields must have a default value in the Avro schema file.

The schema evolution behavior is as follows:

  • Column added in new schema: Data created with an older schema produces a default value when table is using the new schema.

  • Column removed in new schema: Data created with an older schema no longer outputs the data from the column that was removed.

  • Column is renamed in the new schema: This is equivalent to removing the column and adding a new one, and data created with an older schema produces a default value when table is using the new schema.

  • Changing type of column in the new schema: If the type coercion is supported by Avro or the Hive connector, then the conversion happens. An error is thrown for incompatible types.

Limitations#

The following operations are not supported when avro_schema_url is set:

  • CREATE TABLE AS is not supported.

  • Bucketing(bucketed_by) columns are not supported in CREATE TABLE.

  • ALTER TABLE commands modifying columns are not supported.

ALTER TABLE EXECUTE#

The connector supports the following commands for use with ALTER TABLE EXECUTE.

optimize#

The optimize command is used for rewriting the content of the specified table so that it is merged into fewer but larger files. If the table is partitioned, the data compaction acts separately on each partition selected for optimization. This operation improves read performance.

All files with a size below the optional file_size_threshold parameter (default value for the threshold is 100MB) are merged:

ALTER TABLE test_table EXECUTE optimize

The following statement merges files in a table that are under 10 megabytes in size:

ALTER TABLE test_table EXECUTE optimize(file_size_threshold => '10MB')

You can use a WHERE clause with the columns used to partition the table to filter which partitions are optimized:

ALTER TABLE test_partitioned_table EXECUTE optimize
WHERE partition_key = 1

The optimize command is disabled by default, and can be enabled for a catalog with the <catalog-name>.non_transactional_optimize_enabled session property:

SET SESSION <catalog_name>.non_transactional_optimize_enabled=true

Warning

Because Hive tables are non-transactional, take note of the following possible outcomes:

  • If queries are run against tables that are currently being optimized, duplicate rows may be read.

  • In rare cases where exceptions occur during the optimize operation, a manual cleanup of the table directory is needed. In this situation, refer to the Trino logs and query failure messages to see which files must be deleted.

Table properties#

Table properties supply or set metadata for the underlying tables. This is key for CREATE TABLE AS statements. Table properties are passed to the connector using a WITH clause:

CREATE TABLE tablename
WITH (format='CSV',
      csv_escape = '"')
Hive connector table properties#

Property name

Description

Default

auto_purge

Indicates to the configured metastore to perform a purge when a table or partition is deleted instead of a soft deletion using the trash.

avro_schema_url

The URI pointing to Avro schema evolution for the table.

bucket_count

The number of buckets to group data into. Only valid if used with bucketed_by.

0

bucketed_by

The bucketing column for the storage table. Only valid if used with bucket_count.

[]

bucketing_version

Specifies which Hive bucketing version to use. Valid values are 1 or 2.

csv_escape

The CSV escape character. Requires CSV format.

csv_quote

The CSV quote character. Requires CSV format.

csv_separator

The CSV separator character. Requires CSV format. You can use other separators such as | or use Unicode to configure invisible separators such tabs with U&'\0009'.

,

external_location

The URI for an external Hive table on S3, Azure Blob Storage, etc. See the Basic usage examples for more information.

format

The table file format. Valid values include ORC, PARQUET, AVRO, RCBINARY, RCTEXT, SEQUENCEFILE, JSON, TEXTFILE, CSV, and REGEX. The catalog property hive.storage-format sets the default value and can change it to a different default.

null_format

The serialization format for NULL value. Requires TextFile, RCText, or SequenceFile format.

orc_bloom_filter_columns

Comma separated list of columns to use for ORC bloom filter. It improves the performance of queries using range predicates when reading ORC files. Requires ORC format.

[]

orc_bloom_filter_fpp

The ORC bloom filters false positive probability. Requires ORC format.

0.05

partitioned_by

The partitioning column for the storage table. The columns listed in the partitioned_by clause must be the last columns as defined in the DDL.

[]

skip_footer_line_count

The number of footer lines to ignore when parsing the file for data. Requires TextFile or CSV format tables.

skip_header_line_count

The number of header lines to ignore when parsing the file for data. Requires TextFile or CSV format tables.

sorted_by

The column to sort by to determine bucketing for row. Only valid if bucketed_by and bucket_count are specified as well.

[]

textfile_field_separator

Allows the use of custom field separators, such as ‘|’, for TextFile formatted tables.

textfile_field_separator_escape

Allows the use of a custom escape character for TextFile formatted tables.

transactional

Set this property to true to create an ORC ACID transactional table. Requires ORC format. This property may be shown as true for insert-only tables created using older versions of Hive.

partition_projection_enabled

Enables partition projection for selected table. Mapped from AWS Athena table property projection.enabled.

partition_projection_ignore

Ignore any partition projection properties stored in the metastore for the selected table. This is a Trino-only property which allows you to work around compatibility issues on a specific table, and if enabled, Trino ignores all other configuration options related to partition projection.

partition_projection_location_template

Projected partition location template, such as s3a://test/name=${name}/. Mapped from the AWS Athena table property storage.location.template

${table_location}/${partition_name}

extra_properties

Additional properties added to a Hive table. The properties are not used by Trino, and are available in the $properties metadata table. The properties are not included in the output of SHOW CREATE TABLE statements.

Metadata tables#

The raw Hive table properties are available as a hidden table, containing a separate column per table property, with a single row containing the property values.

$properties table#

The properties table name is composed with the table name and $properties appended. It exposes the parameters of the table in the metastore.

You can inspect the property names and values with a simple query:

SELECT * FROM example.web."page_views$properties";
       stats_generated_via_stats_task        | auto.purge |       trino_query_id       | trino_version | transactional
---------------------------------------------+------------+-----------------------------+---------------+---------------
 workaround for potential lack of HIVE-12730 | false      | 20230705_152456_00001_nfugi | 434           | false
$partitions table#

The $partitions table provides a list of all partition values of a partitioned table.

The following example query returns all partition values from the page_views table in the web schema of the example catalog:

SELECT * FROM example.web."page_views$partitions";
     day    | country
------------+---------
 2023-07-01 | POL
 2023-07-02 | POL
 2023-07-03 | POL
 2023-03-01 | USA
 2023-03-02 | USA

Column properties#

Hive connector column properties#

Property name

Description

Default

partition_projection_type

Defines the type of partition projection to use on this column. May be used only on partition columns. Available types: ENUM, INTEGER, DATE, INJECTED. Mapped from the AWS Athena table property projection.${columnName}.type.

partition_projection_values

Used with partition_projection_type set to ENUM. Contains a static list of values used to generate partitions. Mapped from the AWS Athena table property projection.${columnName}.values.

partition_projection_range

Used with partition_projection_type set to INTEGER or DATE to define a range. It is a two-element array, describing the minimum and maximum range values used to generate partitions. Generation starts from the minimum, then increments by the defined partition_projection_interval to the maximum. For example, the format is ['1', '4'] for a partition_projection_type of INTEGER and ['2001-01-01', '2001-01-07'] or ['NOW-3DAYS', 'NOW'] for a partition_projection_type of DATE. Mapped from the AWS Athena table property projection.${columnName}.range.

partition_projection_interval

Used with partition_projection_type set to INTEGER or DATE. It represents the interval used to generate partitions within the given range partition_projection_range. Mapped from the AWS Athena table property projection.${columnName}.interval.

partition_projection_digits

Used with partition_projection_type set to INTEGER. The number of digits to be used with integer column projection. Mapped from the AWS Athena table property projection.${columnName}.digits.

partition_projection_format

Used with partition_projection_type set to DATE. The date column projection format, defined as a string such as yyyy MM or MM-dd-yy HH:mm:ss for use with the Java DateTimeFormatter class. Mapped from the AWS Athena table property projection.${columnName}.format.

partition_projection_interval_unit

Used with partition_projection_type=DATA. The date column projection range interval unit given in partition_projection_interval. Mapped from the AWS Athena table property projection.${columnName}.interval.unit.

Metadata columns#

In addition to the defined columns, the Hive connector automatically exposes metadata in a number of hidden columns in each table:

  • $bucket: Bucket number for this row

  • $path: Full file system path name of the file for this row

  • $file_modified_time: Date and time of the last modification of the file for this row

  • $file_size: Size of the file for this row

  • $partition: Partition name for this row

You can use these columns in your SQL statements like any other column. They can be selected directly, or used in conditional statements. For example, you can inspect the file size, location and partition for each record:

SELECT *, "$path", "$file_size", "$partition"
FROM example.web.page_views;

Retrieve all records that belong to files stored in the partition ds=2016-08-09/country=US:

SELECT *, "$path", "$file_size"
FROM example.web.page_views
WHERE "$partition" = 'ds=2016-08-09/country=US'

View management#

Trino allows reading from Hive materialized views, and can be configured to support reading Hive views.

Materialized views#

The Hive connector supports reading from Hive materialized views. In Trino, these views are presented as regular, read-only tables.

Hive views#

Hive views are defined in HiveQL and stored in the Hive Metastore Service. They are analyzed to allow read access to the data.

The Hive connector includes support for reading Hive views with three different modes.

  • Disabled

  • Legacy

  • Experimental

If using Hive views from Trino is required, you must compare results in Hive and Trino for each view definition to ensure identical results. Use the experimental mode whenever possible. Avoid using the legacy mode. Leave Hive views support disabled, if you are not accessing any Hive views from Trino.

You can configure the behavior in your catalog properties file.

By default, Hive views are executed with the RUN AS DEFINER security mode. Set the hive.hive-views.run-as-invoker catalog configuration property to true to use RUN AS INVOKER semantics.

Disabled

The default behavior is to ignore Hive views. This means that your business logic and data encoded in the views is not available in Trino.

Legacy

A very simple implementation to execute Hive views, and therefore allow read access to the data in Trino, can be enabled with hive.hive-views.enabled=true and hive.hive-views.legacy-translation=true.

For temporary usage of the legacy behavior for a specific catalog, you can set the hive_views_legacy_translation catalog session property to true.

This legacy behavior interprets any HiveQL query that defines a view as if it is written in SQL. It does not do any translation, but instead relies on the fact that HiveQL is very similar to SQL.

This works for very simple Hive views, but can lead to problems for more complex queries. For example, if a HiveQL function has an identical signature but different behaviors to the SQL version, the returned results may differ. In more extreme cases the queries might fail, or not even be able to be parsed and executed.

Experimental

The new behavior is better engineered and has the potential to become a lot more powerful than the legacy implementation. It can analyze, process, and rewrite Hive views and contained expressions and statements.

It supports the following Hive view functionality:

  • UNION [DISTINCT] and UNION ALL against Hive views

  • Nested GROUP BY clauses

  • current_user()

  • LATERAL VIEW OUTER EXPLODE

  • LATERAL VIEW [OUTER] EXPLODE on array of struct

  • LATERAL VIEW json_tuple

You can enable the experimental behavior with hive.hive-views.enabled=true. Remove the hive.hive-views.legacy-translation property or set it to false to make sure legacy is not enabled.

Keep in mind that numerous features are not yet implemented when experimenting with this feature. The following is an incomplete list of missing functionality:

  • HiveQL current_date, current_timestamp, and others

  • Hive function calls including translate(), window functions, and others

  • Common table expressions and simple case expressions

  • Honor timestamp precision setting

  • Support all Hive data types and correct mapping to Trino types

  • Ability to process custom UDFs

Fault-tolerant execution support#

The connector supports Fault-tolerant execution of query processing. Read and write operations are both supported with any retry policy on non-transactional tables.

Read operations are supported with any retry policy on transactional tables. Write operations and CREATE TABLE ... AS operations are not supported with any retry policy on transactional tables.

Performance#

The connector includes a number of performance improvements, detailed in the following sections.

Table statistics#

The Hive connector supports collecting and managing table statistics to improve query processing performance.

When writing data, the Hive connector always collects basic statistics (numFiles, numRows, rawDataSize, totalSize) and by default will also collect column level statistics:

Available table statistics#

Column type

Collectible statistics

TINYINT

Number of nulls, number of distinct values, min/max values

SMALLINT

Number of nulls, number of distinct values, min/max values

INTEGER

Number of nulls, number of distinct values, min/max values

BIGINT

Number of nulls, number of distinct values, min/max values

DOUBLE

Number of nulls, number of distinct values, min/max values

REAL

Number of nulls, number of distinct values, min/max values

DECIMAL

Number of nulls, number of distinct values, min/max values

DATE

Number of nulls, number of distinct values, min/max values

TIMESTAMP

Number of nulls, number of distinct values, min/max values

VARCHAR

Number of nulls, number of distinct values

CHAR

Number of nulls, number of distinct values

VARBINARY

Number of nulls

BOOLEAN

Number of nulls, number of true/false values

Updating table and partition statistics#

If your queries are complex and include joining large data sets, running ANALYZE on tables/partitions may improve query performance by collecting statistical information about the data.

When analyzing a partitioned table, the partitions to analyze can be specified via the optional partitions property, which is an array containing the values of the partition keys in the order they are declared in the table schema:

ANALYZE table_name WITH (
    partitions = ARRAY[
        ARRAY['p1_value1', 'p1_value2'],
        ARRAY['p2_value1', 'p2_value2']])

This query will collect statistics for two partitions with keys p1_value1, p1_value2 and p2_value1, p2_value2.

On wide tables, collecting statistics for all columns can be expensive and can have a detrimental effect on query planning. It is also typically unnecessary - statistics are only useful on specific columns, like join keys, predicates, grouping keys. One can specify a subset of columns to be analyzed via the optional columns property:

ANALYZE table_name WITH (
    partitions = ARRAY[ARRAY['p2_value1', 'p2_value2']],
    columns = ARRAY['col_1', 'col_2'])

This query collects statistics for columns col_1 and col_2 for the partition with keys p2_value1, p2_value2.

Note that if statistics were previously collected for all columns, they must be dropped before re-analyzing just a subset:

CALL system.drop_stats('schema_name', 'table_name')

You can also drop statistics for selected partitions only:

CALL system.drop_stats(
    schema_name => 'schema',
    table_name => 'table',
    partition_values => ARRAY[ARRAY['p2_value1', 'p2_value2']])

Dynamic filtering#

The Hive connector supports the dynamic filtering optimization. Dynamic partition pruning is supported for partitioned tables stored in any file format for broadcast as well as partitioned joins. Dynamic bucket pruning is supported for bucketed tables stored in any file format for broadcast joins only.

For tables stored in ORC or Parquet file format, dynamic filters are also pushed into local table scan on worker nodes for broadcast joins. Dynamic filter predicates pushed into the ORC and Parquet readers are used to perform stripe or row-group pruning and save on disk I/O. Sorting the data within ORC or Parquet files by the columns used in join criteria significantly improves the effectiveness of stripe or row-group pruning. This is because grouping similar data within the same stripe or row-group greatly improves the selectivity of the min/max indexes maintained at stripe or row-group level.

Delaying execution for dynamic filters#

It can often be beneficial to wait for the collection of dynamic filters before starting a table scan. This extra wait time can potentially result in significant overall savings in query and CPU time, if dynamic filtering is able to reduce the amount of scanned data.

For the Hive connector, a table scan can be delayed for a configured amount of time until the collection of dynamic filters by using the configuration property hive.dynamic-filtering.wait-timeout in the catalog file or the catalog session property <hive-catalog>.dynamic_filtering_wait_timeout.

Table redirection#

Trino offers the possibility to transparently redirect operations on an existing table to the appropriate catalog based on the format of the table and catalog configuration.

In the context of connectors which depend on a metastore service (for example, Hive connector, Iceberg connector and Delta Lake connector), the metastore (Hive metastore service, AWS Glue Data Catalog) can be used to accustom tables with different table formats. Therefore, a metastore database can hold a variety of tables with different table formats.

As a concrete example, let’s use the following simple scenario which makes use of table redirection:

USE example.example_schema;

EXPLAIN SELECT * FROM example_table;
                               Query Plan
-------------------------------------------------------------------------
Fragment 0 [SOURCE]
     ...
     Output[columnNames = [...]]
     │   ...
     └─ TableScan[table = another_catalog:example_schema:example_table]
            ...

The output of the EXPLAIN statement points out the actual catalog which is handling the SELECT query over the table example_table.

The table redirection functionality works also when using fully qualified names for the tables:

EXPLAIN SELECT * FROM example.example_schema.example_table;
                               Query Plan
-------------------------------------------------------------------------
Fragment 0 [SOURCE]
     ...
     Output[columnNames = [...]]
     │   ...
     └─ TableScan[table = another_catalog:example_schema:example_table]
            ...

Trino offers table redirection support for the following operations:

Trino does not offer view redirection support.

The connector supports redirection from Hive tables to Iceberg and Delta Lake tables with the following catalog configuration properties:

Performance tuning configuration properties#

The following table describes performance tuning properties for the Hive connector.

Warning

Performance tuning configuration properties are considered expert-level features. Altering these properties from their default values is likely to cause instability and performance degradation.

Property name

Description

Default value

hive.max-outstanding-splits

The target number of buffered splits for each table scan in a query, before the scheduler tries to pause.

1000

hive.max-outstanding-splits-size

The maximum size allowed for buffered splits for each table scan in a query, before the query fails.

256 MB

hive.max-splits-per-second

The maximum number of splits generated per second per table scan. This can be used to reduce the load on the storage system. By default, there is no limit, which results in Trino maximizing the parallelization of data access.

hive.max-initial-splits

For each table scan, the coordinator first assigns file sections of up to max-initial-split-size. After max-initial-splits have been assigned, max-split-size is used for the remaining splits.

200

hive.max-initial-split-size

The size of a single file section assigned to a worker until max-initial-splits have been assigned. Smaller splits results in more parallelism, which gives a boost to smaller queries.

32 MB

hive.max-split-size

The largest size of a single file section assigned to a worker. Smaller splits result in more parallelism and thus can decrease latency, but also have more overhead and increase load on the system.

64 MB